Please be sure to review the image requirements as we are not responsible for art that does not follow the guidelines.
Current production time is noted at the top of our website in the banner.
UV DTF is NOT for use on apparel/fabric. It is only for use on hard surfaces. Such as plastic, glass, metal, wood, etc.
Application: Clean surface thoroughly before applying with rubbing alcohol and allow to dry. We recommend warming surface with heat gun or hair dryer first, this aids with adhesion. Peel the clear film and transfer off white backing. Apply transfer where needed (be sure of proper placement as transfer can not be removed without damage after adhered) and rub on to surface starting in center and working outward to push air bubbles out. Carefully peel clear film off while making sure transfer is adhered.
We do not recommend placing items with these transfers in the dishwasher or microwave. Hand wash is strongly recommended. We are not responsible for application mistakes, misalignment, etc. We recommend practicing with these transfers until confident.
